JVC VN-H217U specifications PART 3 EXECUTION, VN-H217VPU Wrench 8. VN-H217VPU Silica gel

Models: VN-H217U

1 11
Download 11 pages 25.15 Kb
Page 9
Image 9
7.[VN-H217VPU] Wrench

Section 28.23.29 Video Surveillance Remote Devices and Sensors

H. Environmental

Specifier Note: JVC provides environmental specifications for optimal operation while achieving maximum in service life of its products. JVC will not mislead owners with the maximum thresholds products will operate to if they reduce the product life cycle. JVC products may operate to more extreme (higher/lower) ratings if required, however the product lifecycle may be shortened. Should you require different environmental conditions please contact your JVC Representative for assistance in specifying the proper products and/or optional accessories.

1.Temperature Range

a.14 to 122 degrees Fahrenheit (-10 to 50 degrees Celsius)

b.Recommended: 32 to 104 degrees Fahrenheit (0 to 40 degrees Celsius)

c.[VN-H217VPU]With heater: -22 to 122 degrees Fahrenheit (-30 to 50 degrees Celsius)

2.Relative Humidity Range

a.Operating: 20% to 80%, non-condensing.

3.[VN-H217U]The unit is suitable for indoor operation.

4.[VN-H217VPU]The unit is suitable for outdoor operation.

2.02MANUFACTURED UNITS

A.JVC Model Number

1.VN-H217U: Fixed IP Dome Camera with electrical Black and White mode.

2.VN-H217VPU: Fixed IP Dome Camera with electrical Black and White mode and Vandal- resistant IP66 rated housing

B.Included Accessories:

1.Safety precautions

2.Read me First

3.CD-ROM including installation manual, setting manual and API guide

4.Service information card

5.Warranty card

6.Mounting template

7.[VN-H217VPU] Wrench

8.[VN-H217VPU] Silica gel

C.Optional Accessories:

1.JVC V. Networks Products

a.VN-X1600U/3200U, VN-N900U/1600U Network video recorders

b.[VN-H217VPU]KA-ZH215U - Heater unit

PART 3 EXECUTION

3.01 INSTALLATION

Specifier Note: Certification or licensing requirements for contractors, installers or integrators of safety and security systems vary from state to state in the continental United States. Verify requirements with the Authority Having Jurisdiction for the specific project. Coordinate article with Section 28 08 00 Commissioning of Electronic Safety and Security. Edit or revise articles below as required for a specific project or specification practices.

A. Installer Qualifications:

© Copyright 2011, Victor Company of Japan, Limited. All rights reserved. “JVC” is the trademark or registered trademark of Victor Company of Japan.

All non-metric weights and measures are approximate. Features and specifications are subject to change with out notice.

MasterFormat, SectionFormat and PageFormat are trademarks of the Construction Specification Institute.

9 of 11

VN_H217U/VPU_V.1_00

Page 9
Image 9
JVC VN-H217U specifications PART 3 EXECUTION, VN-H217VPU Wrench 8. VN-H217VPU Silica gel