Power Connection
Electricity can be supplied to this product either by using the PoE or connecting to the AC 24 V power supply.
When power is supplied to this product, the [STATUS] indicator at the side lights up. The indicator lights up in orange color during startup, and switches to green color after startup is complete.
Caution:
●Make sure to select only one mode of electrical supply. Connecting the power cord and the LAN cable for the PoE at the same time may result in failure or malfunction of the camera.
●Be sure to use an AC 24 V supply that is isolated from the primary power supply circuit. Using a variable voltage power supply will cause the camera and system to malfunction or breakdown.
Using the PoE
Connect to a device that supports PoE to supply electricity from the LAN cable.
1 | 2 | G 2 1 2 1 |
| AC24V | INPUT | OUTPUT |
CLASS2 ONLY FOR USA ISOLATEDPOWER ONLY FOREUROPE AND OTHER |
| ALARM | |
|
| ||
OUT | PoE |
| |
| MONITOR |
|
|
|
|
| |
SEE INSTRUCTION MANUAL |
| ||
CAUTION: NEVER USE PoE AND AC 24V | SAME TIME | ||
DO NOT CONNECT TO THE TELEPHONE | PUSH | ||
MONITOR OUT | PAL OFF NTSC | RESET |
STATUS
IRIS
Status Indicator
Note:
●For details on the connection method and cable type, please refer to ALAN Cable ConnectionB (A Page 16).
What is PoE (Power over Ethernet)?
This is a function that enables operation of a LAN equipment without a power cable by supplying power simultaneously with the data using a LAN cable.
Connect to PoE- compatible device
14