Name and Function of Parts

Front / Bottom / Side

AH

G

BF

E

C

D I

A Back Focus Adjustment Ring

This ring is used for back focus adjustment and switching the lens mount method.

To operate, loosen the H back focus fastening screw by turning it in the anti-clockwise direction, and turn the screw in the clockwise direction to fasten after operation is complete.

This product is pre-adjusted to a position that is best suited for CS mount.

(A Page 20)

B Lens Mount

This is a mount for mounting the lens.

The mount is compatible with CS mount lens and C mount lens.

(A Page 13)

C Camera Mounting Bracket Fastening Screw (2 pcs: M2.6 x 6 mm)

Use screws with a length of 6 mm. Screws beyond the specified length must not be used as doing so may damage the interior.

DAnti-rotation Hole

Use this anti-rotation hole to mount the camera firmly.

E Camera Mounting Screw Holes (1/4-20UNC)

Use this hole when mounting this product to a fixer or rotating platform.

Use screws with a length between 5 mm to

7 mm. Screws beyond the specified length may damage the interior, while those shorter than specified may cause the camera to fall off, and therefore these must not be used.

(A Page 18)

F [MAC address] LED Indicator

The MAC address is a unique physical address of the product. This address cannot be altered.

G Camera Mounting Bracket

This bracket is pre-mounted to the bottom surface of the camera. It can also be mounted to the top surface according to the usage. Mount it to the screw holes at the bottom surface using the C camera mounting bracket fastening screws.

(A Page 18)

H [BF LOCK] Back Focus Fastening Screw

This is the fastening screw for the back focus adjustment unit.

(A Page 20)

I Inner Tripod Base Screw Hole (1/4-20UNC)

Use this hole when mounting this product to a miniature housing.

You can mount to the housing through this hole directly without using the G camera mounting bracket.

(A Page 19)

9