Getting Started
Transporting the unit
Remove the connecting cables when transporting the unit.
When transporting the unit, turn off the power of the system.
Pack the unit with cushioning material so as to avoid shock when transporting.
Handle the unit with care and do not subject it to vibration or shock.
Transportation
Do not throw away the original box of the unit. Keep it and use it for transporting the unit in future.
As the camera unit is of an easily rotatable structure, secure the camera unit inside the dome cover such that it does not rotate before transporting. Otherwise, an error may occur during camera operation.
AFace the heat release vents upward and secure the lens section with tape.
BInsert cushioning material wrapped with air caps (approx. 50 mm x 200 mm) at two opposite sides of the camera.
Cushioning material
ASecure with tape B
Saving Energy
When the camera is not in use for a long time, turn off the power of the system for safety and energy conservation reasons.
Copyright Protection
With the exception of the user being the copyright holder or when permission such as for duplication has been granted by the copyright holder, permission is required in principle for the duplication, modification, or transmission of copyrighted video and audio data. Unauthorized duplication, modification, or transmission of copyrighted material may constitute a copyright infringement, and the user may be liable to compensate for any damages. When using copyrighted video/audio data, be sure to check the license agreement of the copyrighted material thoroughly.
When rights or rights holders are involved with regard to the targeted duplicating subject, permission may be required for shooting or using (processing) it. Be sure to check the licensing conditions thoroughly.
Maintenance
Turn off the power before performing maintenance.
Wipe using a soft cloth.
Wiping with thinner or benzene may melt or tarnish its surface. For tough stains, wipe using a cloth that is dipped into a neutral detergent diluted with water, followed by wiping with a dry cloth.
When the same position is monitored for 24 hours continuously over a long period, the increased contact resistance on the horizontal rotation section may cause noise interferences in the images and operation from the computer may become unstable. As such, this product is equipped with an auto cleaning function that performs cleaning once a week.
Consumable parts
The following are consumable parts. They must be replaced once they reach their lifetime.
The lifetime is only an estimation and differs according to the usage environment and conditions. Replacement of consumable parts is chargeable within the guarantee period.
●Zoom lens assembly
Zoom operation..... Approx. 2 million operations Focus operation .... Approx. 4 million operations
●Slip ring ......... Approx. 5 million operations
●Cooling fan.............. Approx. 50,000 hours
●Heater relay............ Approx. 100,000 times
10