Alarm
By motion detection or alarm input, actions such as mail delivery, message transmission via TCP/UDP, alarm output, turning to preset position, changing B&W mode can be triggered. These actions can also be triggered by combination of two alarm inputs.
Installing an FTP server enables uploading of JPEG images before and after the alarm input time
Alarm Device | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Network |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
Sending JPEG images | Computer |
| ||||
|
|
|
| |||
before and after alarm |
|
|
|
| ||
input to FTP |
|
|
|
| ||
Restrictions on Clients
Control via customized application software
The following uses are also possible by developing a customized application software that supports the API of
For details, please refer to [API GUIDE] in the supplied
●Monitors via the computer while at the same time records images to the HDD of the computer.
●Performs recording by changing the frame size/frame rate during alarm occurrence.
●Records the type and time of alarm occurrence on the computer.
TFor detailed usage of
Camera Mounting
Procedures
Mount the camera using the following procedures.
Step 1 Connection/Installation (A Page 16)
\
Mounting the ceiling clamping bracket (A
Mounting the camera (A Page 18)
\G
Step 2 Network settings (A Page 26)
Configure the network settings of the computer and this camera.
TIn a system where multiple units of VN- V686U are used, turn on the power of only one unit to configure the IP address settings using the Internet Explorer. Upon doing so, turn on the power of the second unit and configure accordingly. Configure the settings for the other cameras using the same procedure.
G
Step 3 Configuring settings using the Internet Explorer
Configure the picture quality and alarm settings using the Internet Explorer.
TFor detailed usage of
G
Step 4 Operating the
The
15