Mounting the Camera (contiuned)

Mounting the ceiling clamping bracket to the ceiling

1 Secure the ceiling clamping bracket on the ceiling

Install such that the ADFRONT markB of the ceiling clamping bracket faces the front.

Ensure that the connection cables are not caught in between and secure the ceiling clamping bracket on the ceiling with 3 screws.

Front of the camera

DFRONT mark

Screws

5 mm (3/16 inch) and below

Note:

Use M4 fixing screws and bolts.

Use R4.1 wood screws.

The length of the screws should be 25 mm (1inch) and above.

Place the product horizontally and install. The camera will not operate properly if it is slanted.

The screw head should be 5 mm and below. If the ceiling structure is metal, image noise may occur.

Do not use the type of screw that the screw head will go under the hole when tightening.

flathead screw etcResin part for insulation will be damaged causing loss of insulation.

Memo:

Always use 3 screws and mount securely.

Tighten the screws again during maintenance just to be safe.

The plastic parts on the ceiling fixing holes of the ceiling clamping bracket act as an insulation between the ceiling clamping bracket and the ceiling structure. If the ceiling structure is metal and insulation is not provided between the camera and the ceiling structure, image noise may occur. Be sure to provide insulation.

Mounting the camera to the ceiling

1 Remove the tape on the lens section

2 Remove the lens cap

1

Tape

2

Lens cap

Camera

3 Mount the dome cover to the camera

A Check that the dome cover and lens are free from dirt.

B Turn the dome cover in a clockwise direction to mount.

Note:

Be sure to turn the dome cover until it stops and tighten securely. Make sure that the dome cover is not slanted.

Do not over-rotate the dome cover. This may damage the dome cover.

Memo:

If it is difficult to screw on the dome cover, turn it in an anticlockwise direction until you hear a click sound, then turn it in a clockwise direction. It will screw on smoothly.

4 Remove the dome cover protective sheet

 

4

 

 

 

 

 

 

Dome cover

Dome Cover

 

 

 

 

 

protective

 

 

 

 

 

sheet

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

18