Getting Started

Cautionary Notes

Maintenance and location of use

This product is intended for use indoors. Make sure that you use a housing etc., when using it outdoors.

Do not place this product in the following environments.

Otherwise, it may malfunction or break down.

Hot or cold locations beyond the surrounding temperature range of -10°C to 50°C.

Locations beyond the allowable operating humidity range of 20 % RH to 85 % RH. (condensation is not allowed)

Near equipment that emits strong magnetic fields, such as transformers or motors.

Near equipment that emits radio waves, such as transceivers and mobile phones.

Locations with excessive dust or sand.

Locations that are subject to vibration.

Locations prone to moisture such as window side.

Locations subject to steam or oil, such as kitchens.

Locations that emit radiation, X-rays or corrosive gases.

Use of this product or cables connected to this product at locations where strong electric waves and magnetic fields are emitted (e.g., near radio, TV, transformer, monitor, etc.) may cause noise interferences in the images or changes in the color.

Do not install this product at locations that may trap heat.

This product also discharges heat from the surface of the camera unit. As such, do not install it at locations that may trap heat, such as near walls.

Handling Precautions

Do not hang on this product, shake it, or hand objects over it. Applying an excessive load may cause the product to fall off and result in accidents.

Do not stack up the equipment.

Heat or noise of an equipment may cause malfunction or failure of the other, and result in fire.

Do not block vents around the equipment.

Inadequate heat ventilation may result in malfunction of this product. Be sure not to block vents around the product.

Saving Energy

When this product is not in use for a long period of time, turn off the power of the system to ensure safety and reduce power consumption.

Maintenance

Be sure to turn off the power before performing maintenance.

Wipe this product using a soft cloth.

Wiping with thinner or benzene may melt or tarnish its surface. For dirt that cannot be easily removed, wipe using a neutral detergent diluted with water, followed by wiping with a dry cloth.

Copyright Protection

With the exception of the user being the copyright holder or when permission such as for duplication has been granted by the copyright holder, permission is required in principle for the duplication, modification, or transmission of copyrighted video and audio data.

Unauthorized duplication, modification, or transmission of copyrighted material may constitute a copyright infringement, and the user may be liable to compensate for any damages. When using copyrighted video/ audio data, be sure to check the license agreement of the copyrighted material thoroughly.

When rights or rights holders are involved with regard to the targeted duplicating subject, permission may be required for shooting or using (processing) it. Be sure to check the licensing conditions thoroughly.

Exemption of Liability

The motion detection feature is not a feature to prevent theft or fire. JVC shall not be liable for any damage that occurs.

JVC shall not be liable for any damage due to the invasion of privacy by images of this camera.

8