Getting Started
Name and Function of Parts
Front / Bottom / Side
A H
G
BF
E
C
D I
A Back Focus Adjustment Ring
This ring is used for adjusting the back focus. To operate, loosen the H back focus fastening screw by turning it in the
This product is
B Lens Mount
This is a mount for mounting the lens.
The mount is compatible with CS mount lens. (A Page 16)
C Camera Mounting Bracket Fastening Screw (2 pcs: M2.6 x 6 mm)
Use screws with a length of 6 mm. Screws beyond the specified length must not be used as doing so may damage the interior.
D
Use this
F [MAC address]Indicator
The MAC address is a unique physical address of the product. This address cannot be altered.
G Camera Mounting Bracket
This bracket is
H [BF LOCK] Back Focus Fastening Screw
This is the fastening screw for the back focus adjustment unit. (A Page 23)
I Inner Tripod Base Screw Hole
Use this hole when mounting this product to a miniature housing.
You can mount to the housing through this hole directly without using the G camera mounting bracket. (A Page 22)
E Camera Mounting Screw
Use this hole when mounting this product to a fixer or rotating platform.
Use screws with a length between 5 mm to
7 mm. Screws beyond the specified length may damage the interior, while those shorter than specified may cause the camera to fall off, and therefore these must not be used.(A Page 21)
10