Connection / Installation
Mounting the Lens
Note:
●Make use of a megapixel lens.
1.Check the mounting method of the lens to be used before mounting
● The mount method used for
● Make use of the values listed in the table below for the dimensions of the lens mount
(a) indicated in the following diagram.
Lens | Flange Focus (b) | Dimension (a) |
|
|
|
CS Mount | 12.5 mm | 5.5 mm and |
Lens |
| below |
|
|
|
● Objects longer than the dimension (a) must not be used as doing so may damage the camera interior or prevent the lens from being properly mounted, hence resulting in malfunctions.
(a) F
3.When using a DC iris lens, pay attention to the pin position before connecting the lens cable
2.
MONITOR OUT PAL OFF NTSC | RESET | |
STATUS |
|
|
| S |
|
1 | 3 | 3. |
2 | 4 |
|
3
1
(b)
2.Turn the lens in the clockwise direction to mount it to the camera firmly
Pin No.
4
2
DC Iris Lens
(Without
1Damping
2Damping (+)
3Driving (+)
4Driving
Memo:
●Use a 4 Pin Plug to connect when the plug of lens cable is different.
(Product number of 4 Pin Plug :
16