N [MONITOR OUT] Monitor Video Signal Output Terminal (RCA)

This is an output terminal for composite video signals (1 V (p-p), output impedance of 75 K). Use this terminal to connect to devices such as a video monitor.

This terminal is used for adjusting the camera angle during installation. (A Page 19)

Memo:

●Use the J [MONITOR OUT]switch to select the availability of output as well as the signal system. When the switch is toggled, press the K Reset button for less than two seconds to reboot the unit.

●When using the [MONITOR OUT] output, set the privacy mask to AOffB. (A Page 61)

O[10BASE-T/100BASE-TX]

Use this terminal to connect to the network via a LAN cable.

This product supports PoE (IEEE802.3af) and therefore can be used without a power cable. PoE: class 0

(A Page 17,18)

P [ALARM INPUT/OUTPUT] Alarm Input/ Output Terminals

Use these terminals to connect to an external alarm device.

(A Page 20)

Q [AC24V] Power Input Terminal

Use this terminal to connect to an AC 24 V, 50/60 Hz power supply.

(A Page 17)

R Fall Prevention Wire Mounting Screw (M3 x 6 mm)

Use this screw to mount the fall prevention wire. (A Page 21)

S [AUDIO IN/OUT] Audio Signal Input/ Output Terminal(Mini jack, R3.5, stereo)

This is an audio input/out terminal. Connect using a mini jack R3.5 stereo cable.

(A Page 19)

12