Getting Started
CAUTIONS:
•Make all connections before plugging the System into an AC power outlet.
•Handling the speakers
As this is a precision instrument, handle it carefully so as to protect it from shocks.
Connecting the Speakers
These speakers are exclusively for this system. Using with other devices will damage the speakers.
1.Open each of the terminals to connect the speaker wire leads.
2.Connect the speaker cords between the Speaker terminals of the Unit and the terminals of the Speakers. Connect the cords with a black line to the
3.Close each of the terminals to securely connect the cords.
Right side (rear view) | Marked with a black line | Left side (rear view) |
English
| SPEAKERS |
R | L |
SPEAKER IMPEDANCE 4 
16 
•Since both speakers are the same, you can put either one to the right or left side.
•Do not connect other speakers to the Unit. The difference of the load impedance causes failures.
•Do not use the supplied speakers in parallel with other speakers.
CAUTION:
•Although the speakers have internal magnetic shieldings, a TV may display irregular colors if located near the speakers. If this happens, set the speakers away from the TV.
Removing the speaker grilles
The speaker grilles can be removed.
When removing:
1.Pull the bottom towards you with your fingers.
2.Also pull the top towords you.
When attaching the speaker grilles:
Attach the speaker grilles as shown in the diagram.
Speaker | Speaker |
grille | grille |
6
