JVC XL-PR1BK manual Other Play Methods, Intro play, Program play, Hyper-Bass Sound effect

Other Play Methods

Intro play

You can successively play the first 10 seconds of every track. Intro play stops after playing the last track.

1During playback,

MODE/

FM MODE

(Repeatedly)

2

The Intro play will start from the first track.

Program play

You can program up to 20 tracks in any desired order including the same tracks.

1During playback or in stop mode,

PROGRAM

	Program sequence
Track number to be programmed	number
00: Not programmed yet.

2Select the desired track.

Repeat play

You can repeat one track or all tracks.

During playback,

MODE /

FM MODE

(Repeatedly)

To cancel

Press MODE/FM MODE repeatedly until the repeat indicator goes out.

Notes:

•You can also select Repeat play during Program play.

•You can also select Repeat play in stop mode.

Hyper-Bass Sound effect

To cancel

Press MODE/FM MODE repeatedly until “INTRO” goes out.

You can enjoy powerful bass sound.

To get the Hyper-Bass Sound effect

To normally play the track being played

e.g. Track number 3

Set HBS switch to “ON”.

Press 3/8 during Intro play.

3

Notes:

•In step 2, pressing ¢ instead of 3/8 will start Intro play from the next track. Also, pressing 4 will start Intro play from the current track. When no button is pressed, Intro play will start from the next track after the current track has finished.

•You can also select Intro play in stop mode.

•You can also select Intro play during Program play.

PROGRAM

Next program sequence number

The track is registered.

HBS

OFF ON

To cancel

Set HBS switch to “OFF”.

Anti-Shock Protection

Random play	4 Repeat steps 2 and 3 to program other tracks.
You can play all tracks in a random order. After playing all tracks,
	When you program exceeding 20 tracks, the program se-
the unit stops.	quence number returns to “01” and will overwrite the previ-
	ous setting.
During playback,	5
MODE /
FM MODE
(Repeatedly)	The tracks are played in the programmed order.

This function minimizes sound interruption caused by vibrations, by utilizing audio data that has been stored in the memory ahead of time (up to 45 seconds worth).

Normally, the “ANTI SHOCK” indicator lights up on the display and the Anti-Shock Protection is in effect.

ANTI SHOCK indicator

When the disc is played, as the audio data gradually stored in the memory, the “ANTI SHOCK” indicator changes as follows:

To cancel

Press MODE/FM MODE until “RANDOM” goes out, or press 7 to stop.

Notes:

•You can also select Random play in stop mode.

•During Program play, you can not select Random play.

•To confirm the program

In stop mode, press PROGRAM repeatedly. The programmed track number will successively appear together with the pro- gram sequence number. At this time, you can change the pro- gram, if required.

If the programmed tracks are less than 20, track number “00” appears for the youngest programmable sequence number, en- abling further programming.

•To delete the entire program

Turn off the unit, or set the track number to 00 for the first pro- gram sequencer number, “01”.

[Fully stored]

To cancel

Press the A.S.P. button in stop mode or during playback. The “ANTI SHOCK” indicator goes out.

To activate again

Press the A.S.P. button.

Notes:

•During Anti-Shock Protection operation, the disc rotates at a higher rate than usual in order to collect extra audio data. This may cause the batteries to run out faster and could result in a slight increase in disc rotation noise.

•The Anti-Shock Protection function can be switched ON and OFF during playback. However, this may cause a slight inter- ruption in the sound because the disc’s rotational speed changes.

6