Moving Tracks (MOVE Function)
Use the unit to carry out this function.
1In Stop mode, press the EDIT/ENTER button and turn the JOG dial until “MOVE?” is displayed.
2Press the SET button.
JOG dial 
Track to moved
•You can listen to the track by pressing the 6 button. The track to be moved is repeatedly played.
3Turn the JOG dial (or press the 4 or ¢ button) to select the track number to be moved.
4Press the SET button.
5Turn the JOG dial (or press the 4 or ¢ button) to select the destination to which the track is to be moved.
Track to be moved | Destination track |
•If you are playing back the MD, the destination track is repeatedly played.
6Press the SET button.
“PUSH ENTER” appears.
7Press the EDIT/ENTER button.
“COMPLETE” and “TOC” appear, indicating suc- cessful recording.
•When you turn off the power by pressing the 7/ CHARGE button, “UTOC Writing” will be displayed and the edited contents are written. (The “TOC” indi- cator goes out.)
To cancel the operation, press the 7/CHARGE button in step 1 through 6 until the display returns to the origi- nal display.
Erasing Tracks (ERASE Function)
Use the unit to carry out this function.
1In Stop mode, press the EDIT/ENTER button and turn the JOG dial until “ERASE?” is displayed.
2Press the SET button.
JOG dial 
Track to be erased
•You can listen to the track by pressing the 6 button. The track to be erased is repeatedly played.
3Turn the JOG dial (or press the 4 or ¢ button) to select the track number to be erased.
4Press the SET button.
“ERASE OK? PUSH ENTER” appears.
5Press the EDIT/ENTER button.
“COMPLETE” appears, indicating successful eras- ing.
The selected track is erased and the track number is decreased by 1.
•When you turn off the power by pressing the 7/ CHARGE button, “UTOC Writing” will be displayed and the edited contents are written.
To cancel the operation, press the 7/CHARGE button in step 1 through 4 until the display returns to the origi- nal display.
Erasing All the Tracks (ALL ERASE Function)
Use the unit to carry out this function.
1In Stop mode, press the EDIT/ENTER button and turn the JOG dial until “ALL ERASE?” is displayed.
2Press the SET button.
“ERASE OK? PUSH ENTER” appears.
3Press the EDIT/ENTER button.
“COMPLETE” appears, indicating successful erasing.
All the tracks in the MD are erased and “BLANK DISC” is displayed.
•When you turn off the power by pressing the 7/CHARGE button, “UTOC Writing” will be displayed and the edited contents are written.
To cancel the operation, press the 7/CHARGE button in step 1 or 2.
10
