JVC XM-R70 manual Giving Titles to MD Title Function, Stop mode, press the EDIT/ENTER button

Giving Titles to MD (TITLE Function)

Use the unit to carry out this function.

•You can give a disc title to the MD and a track title to the tracks in the MD. Any title name can be give up to 64 characters using the provided character sets.

1In Stop mode, press the EDIT/ENTER button.

“TITLE?” is displayed.

2Press the SET button.

Track to be entitled

(or press the 4 button) until the following disc mark is shown on the display.

4 Press the SET button. Disc mark

Cursor Title name area

• You can listen to the track by pressing the 6 but- ton. The track to be entitled is repeatedly played.

Characters to be input

3Turn the JOG dial (or press the 4 or ¢ button) to select the track number to be entitled.

To select the disc title, turn the JOG dial reverse

[Title editing buttons on the unit]

5Input a preferred title (up to 64 charac- ters).

Use the following title editing buttons to input a title.

Button	Function
	Changes the type of characters to be input as follows.
	Upper-case letters (ABC) = Lower-case letters (abc) = Symbols (space, !”) = Numbers (012) =
	(back to the beginning)
	Adds the character being selected to the title name area.
JOG	Moves the cursor for the character to be input to the right. When continue turning, the characters scroll to
(forward)	the left.
JOG	Moves the cursor for the character to be input to the left. When continue turning, the characters scroll to
(reverse)	the right.

¢Moves the cursor for the title name to the right.

4Moves the cursor for the title name to the left.

Example: When input the title “M1”

1)Select “M” (put the cursor to the letter M using the JOG dial).

2)Press the SET button. The letter M is now displayed in the title name area.

3)Press the DISPLAY / CHARA. button until the numbers are displayed.

4)Select “1” and press the SET button. The title name “M1” will be displayed.

•If the wrong character has been input, clear it by pressing the 7/CHARGE button.

•To clear a particular character which has been input, use the ¢ or 4 button to align the cursor with the character, and press the 7/CHARGE button. Then, select the correct character and press the SET button.

6.Press the EDIT/ENTER button.

“COMPLETE” and “TOC” appear, indicating successful recording.

•When you turn off the power by pressing the 7/CHARGE button, “UTOC Writing” will be displayed and the edited contents are written. (The “TOC” indicator goes out.)

To cancel the operation, press the 7/CHARGE button in step 1 through 3 or depress it in step 4 or 5, until the display returns to the original display.

[Character sets table]

Upper-case letters

A	B	C	D	E
F	G	H	I	J
K	L	M	N	O
P	Q	R	S	T
U	V	W	X	Y
Z

Lower-case letters

a	b	c	d	e
f	g	h	i	j
k	l	m	n	o
p	q	r	s	t
u	v	w	x	y
z

Symbols

(space) ! ” # $

% & ’ ( )

+ , – .

/ : ; < =

> ? @ _ `

Numbers

0	1	2	3	4
5	6	7	8	9

11