JVC XU-301BK manual Select two recording sources, Adjust the recording level and mixing balance

Flashing

MIXING

CD LINE MIC

REC SOURCE SELECTOR

Example:

CD + LINE

3 Select two recording sources.

•	CD + LINE	: To mix and record CD and line input signals
•	CD + MIC	: To mix and record CD and mic input signals
•	LINE + MIC	: To mix and record line input and mic input signals

•The lamps of the selected sources stop flashing and light. The other lamp goes off.

•Since analog signals are recorded, the REC LEVEL and MIX BALANCE lamps light.

English

•Press the same button again to clear the selection.

MIX BALANCE

Lamp lights.

REC LEVEL

LINE	CD	MIN	MAX
MIC	LINE

4 Adjust the recording level and mixing balance.

REC LEVEL				MIX BALANCE				MIX BALANCE
			LINE		CD		LINE		CD
			MIC		LINE		MIC		LINE
MIN MAX	CD + LINE	CD volume is reduced.				Line input volume is reduced.
	CD + MIC	CD volume is reduced.				Mic input volume is reduced.
	LINE + MIC	Line input volume is reduced.				Mic input volume is reduced.

RECREC

PAUSE START

•Adjust the volume in such a way that the 0 dB display of the level meter is not exceeded when the loudest sound is supplied.

5Play the sound of the source to be recorded.

•If the CD1 button is pressed when mixing with a CD and recording the result, the tracks are recorded in the following sequence: CD1 = CD2 = CD3.

6Press the REC START button to start the recording.

•When MD recording is completed

After “UTOC WRITING” is displayed, operation stops automatically. Press the REC STOP button to stop the recording at any time.

Upon completion of the MD recording, “UTOC WRITING” is displayed. Operating any button while this message is displayed may render the MD unusable.

Always wait for “UTOC WRITING” to be cleared before proceeding with the next operation.

33