Timer Recording (unattended record- ing of the sound from a broadcast re- ceiver or other component)
9 |
|
|
|
|
|
|
| 8 |
|
| 6 | · | 7 |
|
|
|
|
|
|
|
| DIGITAL INPUT |
|
|
|
| DISPLAY |
| |
|
|
|
| 32kHz | 44.1kHz | 48kHz |
| EDIT | TITLE |
| /CHARA | PLAY MODE | ||
|
|
|
|
|
|
|
|
|
|
|
|
| ||
CD 3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CD 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MIXING | CANCEL |
|
|
| SET | |
CD 1 |
|
| REC | REC | REC | DIGITAL | CD | LINE | MIC |
|
|
|
| |
|
| PLAY & EXCHANGE | PAUSE | START | STOP |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| REC SOURCE SELECTOR |
|
|
|
|
| |
STANDBY | TIMER | CD PITCH CONTROL |
|
|
|
|
|
|
|
| MIX BALANCE | REC LEVEL | ||
| /CLOCK | 1st TRACK | LISTENING |
|
|
|
|
|
| CD |
|
|
|
|
|
| REC | EDIT |
|
|
|
|
|
|
|
|
|
|
|
POWER | NORMAL SPEED | MD | LINE | CD | MIN | MAX |
|
|
| MIC | LINE |
|
|
CD REC | SKIP | MIC | PHONES |
|
| SAMPLING RATE CONVERTER |
|
Continued from page 47 (while “PLAY?” is flashing)
6 Select “REC?” and press the SET button.
SET
1 Select “ | .” | 2 Press the SET button. \ |
7 Select the sound source to be recorded, and press the SET button.
| \ SOURCE OPT?: Optical digital input |
| Ç |
| SOURCE LINE?: Line input (analog) |
When the jog dial is | Ç |
turned clockwise | SOURCE MIC?: Mic input (analog) |
SET |
|
| This display appears when the ONCE TIMER |
ONCE | play mode is set. |
| |
| The timer programming is displayed once, |
| and then the function display is restored. |
English
Lamp lights.
STANDBY
POWER
8Place the recording MD in position.
• Place the MD with its label side facing up, and insert it in the direction of the #or ]mark.
9Turn off the power.
The present time now appears in the display window.
Match the timer of the connected source with the unit’s setting. (In the case of the mic input, ensure
that the microphone has been connected to the unit.)
•
•
•
Recording will now start at the programmed start time, and the power will be turned off at the programmed end time.
When operation is completed once in the ONCE TIMER mode, the timer programming is cleared.
If digital signals are not supplied when timer recording has been started with digital input signals, “ DIGITAL IN UNLOCK” is scrolled on the display, and no signals will be recorded.
When using the timer to record a BS program, for instance, check that the broadcast station with the desired program can be tuned in correctly before programming the timer start and end times.
The timer programming is cleared when the power has failed or the power cord has been discon- nected. In a case like this, reset the clock and repeat the timer programming.
49
