JVC XV-515GD Mode, Screen saver picture appears and scrolls, Lt/Rt Dolby Digital disc only, L0/R0

Setting and adjustment

The following chart shows the relationship between types of playback discs and output signals.

Playback discs		Output
	STREAM/PCM	DOLBY DIGITAL/PCM	PCM ONLY
DVD with 48-kHz,	48-kHz,	←	←
16-bit linear PCM	16-bit linear
	PCM

COMPRESSION

You can compress the dynamic range of the sound if needed. Using this function, you can listen to sound at low volumes easily.

PREFERENCE1	PREFERENCE2
DIGITAL AUDIO OUTPUT		PCM ONLY
DOWN MIX		L0 / R0
COMPRESSION		ON
SCREEN SAVER		MODE1
AV COMPULINK MODE		DVD1
AUTO STANDBY		OFF
PRESS	KEY

DVD with 48-kHz,	48-kHz,	←	←
20/24-bit linear	20-bit linear
PCM	PCM
DVD with 96-kHz,	No output	←	←
linear PCM
DVD with DTS	DTS	No output	←
	bitstream
DVD with Dolby	Dolby Digital	←	48-kHz, 16-bit
Digital	bitstream		linear PCM
DVD with MPEG	MPEG	48-kHz, 16-bit	←
audio	bitstream	linear PCM
Video CD	44.1-kHz,	←	←
SVCD	16-bit linear
	PCM
Audio CD	44.1-kHz,	←	←

•ON

Audio is played back with the dynamic range compressed.

•OFF

Audio is played back as it was recorded.

NOTES

•The Compression function works only when playing back a disc recorded with DOLBY DIGITAL 1CH or 2CH. The setting is not effective for other discs.

•The Compression function does not work when the 3D PHONIC function is activated.

	16-bit linear
	PCM
Audio CD with	DTS	←	←
DTS	bitstream

NOTES

•	The unit does not provide the DTS decoding function.
•	When playing a DVD or Audio CD disc with DTS, use a
	DTS decoder to get correct signals from your speakers.
	Never use the unit's analog output jacks, which output
	incorrect signals that may damage your speakers.
	If you connect the analog outputs and digital outputs
	simultaneously, be sure to select the source of the

SCREEN SAVER

A television monitor screen may be burned out if a static picture is displayed for a long time. To prevent this, the unit automatically activates the screen saver function if a static picture, such as an on-screen display or menu, is displayed for over 5 minutes.

PREFERENCE1	PREFERENCE2
DIGITAL AUDIO OUTPUT		PCM ONLY
DOWN MIX		L0 / R0
COMPRESSION		ON
SCREEN SAVER		MODE1
AV COMPULINK MODE		DVD1
AUTO STANDBY		OFF
PRESS	KEY

amplifier correctly, or set the level control of the amplifier

connected to the analog outputs to minimum.

• MODE 1

The "screen saver" picture appears and scrolls.

• MODE 2

Setting and adjustment

DOWN MIX

By setting DOWN MIX correctly, you can get the optimum stereo mix for your audio system from DVD discs recorded with Dolby Digital surround multichannel audio.

PREFERENCE1	PREFERENCE2
DIGITAL AUDIO OUTPUT		PCM ONLY
DOWN MIX		L0 / R0
COMPRESSION		ON
SCREEN SAVER		MODE1
AV COMPULINK MODE		DVD1
AUTO STANDBY		OFF
PRESS	KEY

The "screen saver" picture appears and does not

scroll.

• DIMMER

The current picture gets dark.

• OFF

The screen saver function is off.

•Lt/Rt (Dolby Digital disc only):

For monitoring the unit's 2-channel audio output signals via a Dolby Pro Logic decoder.

•L0/R0:

For monitoring the unit's 2-channel audio output signals via a TV or an amplifier with no built-in Dolby Pro Logic decoder. Also for recording DVD audio to a cassette tape, MD, etc.

NOTE

•The Down mix function does not work when the 3D PHONIC function is activated.

NOTES

•When the screen saver mode is set to DIMMER, the display window on the front panel also gets dark (FL Dimmer). To return to normal brightness, set to another mode.

•The monitor screen of a projector or projection TV is easily burned out if a static picture is displayed for a long time. Be careful not to allow the monitor screen to be burned out when you set the screen saver mode to OFF.

•The TV screen may be garbled when you set the screen saver mode to MODE 1. In this case, set to another mode.

36