Additional | information |
|
|
Additional information
Troubleshooting
What appears to be a malfunction may not always be serious. Please go through the following list before requesting service.
Symptom | Possible case | Remedy | ||
|
|
|
| |
Power does not come on. | Power plug is not inserted securely. | Plug in securely. | ||
|
|
|
| |
Remote control does not work. | Too far from the unit. | More closer to the unit. | ||
|
|
|
| |
|
| The tip of the remote unit is not | Point the infrared light- emitting window | |
|
| pointed in the right direction. | toward the remote sensor on the front panel. | |
|
|
|
| |
|
| Batteries are exhausted. | Replace the batteries with new ones. | |
|
|
|
| |
|
| Battery polarity is incorrect. | Take out the batteries and insert them again | |
|
|
| in the correct direction. | |
|
|
| ||
No picture is displayed on the | Connection of video cable is | Connect the cable correctly. | ||
monitor. | incorrect. |
| ||
|
|
|
| |
|
| Input selection of TV is incorrect. | Select correctly. | |
|
|
|
| |
|
| Disc is not playable. | Use a playable disc. (See page 11.) | |
|
|
| ||
Picture is noisy. | The unit is connected to a VCR | Connect the unit so that the picture signal | ||
|
| directly and the copyguard function | flows directly to the TV. | |
|
| is activated. |
| |
|
|
| ||
No audio is reproduced. | Connection is incorrect. | Check the connections. | ||
|
|
|
| |
|
| Input selection of amplifier is | Select correctly. | |
|
| incorrect. |
| |
|
|
| ||
No audio is reproduced when | The audio signal is derived from the | Use the AUDIO OUT when playing back such | ||
playing back a DVD disc recorded | unit's DIGITAL OUT. | discs. | ||
with |
|
| ||
|
|
| ||
Sound is distorted or noise is | Disc is dirty. | Wipe the disc surface. | ||
generated. |
|
| ||
|
|
| ||
Picture does not fit the television | MONITOR TYPE is not correctly set. | Select monitor type correctly. (See page 37.) | ||
screen. |
|
| ||
Television is not correctly set. | Set the television correctly. | |||
|
| |||
|
|
| ||
Operation is not possible. | Microcomputer malfunction due to | Turn off the power and unplug the power | ||
|
| lightning or static electricity. | cord, then connect the power cord again. | |
|
|
|
| |
|
| Moisture condensation caused by a | Turn off the power, then turn it on a few hours | |
|
| sudden change of temperature or | later. | |
|
| humidity. |
| |
|
|
|
| |
43
