Getting started

Connections

*In the following description, “TV” may be substituted with “monitor” or “projector.” *Before using the unit, you have to connect the unit to a TV and/or amplifier.

Before making any connections

Do not connect the AC power cord until all other connections have been made.

Since different components often have different terminal names, carefully read the instructions supplied with the component you are going to connect.

To connect to a TV

You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio outputs to your separate audio equipment. (See the following pages.)

The unit

DIGITAL OUT

VIDEO OUT

 

PCM / STREAM

COMPONENT

 

Y

PB

PR

COAXIAL

 

 

started

S-VIDEO VIDEO

RIGHT LEFT

AUDIO OUT

Getting

T V

Yellow White

IN

S-VIDEO

Red

Yellow

VIDEO

LEFT

Audio/Video cable

White

Red

(supplied)

S-video cable (not supplied)

AUDIO

RIGHT

Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.

If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo audio output to monaural.

If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the S-video cable (optional) in addition to the (standard) video connection to get better picture quality.

NOTES

Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may cause a monitor problem when playing back a copy-protected disc.

Connect the unit to an NTSC television. Do not connect the unit to a PAL television.

13

Page 15
Image 15
JVC XV-LTR1 manual Getting started, Connections, Before making any connections, To connect to a TV