JVC XV-M50BK, XV-M52SL manual To connect to a TV with the Scart connector, Display window

Getting started

To connect to a TV with the SCART connector

You can enjoy using the unit by simply connecting it to your television set with a 21-pin SCART cable. To hear audio sound with better quality, connect the audio output to your audio equipment.

Getting started

SCART cable (not supplied)

The unit

VIDEO OUT			AV OUT
VIDEO S-VIDEO				AV
	COMP.	Y/C

AV COMPU LINK	AUDIO OUT	DIGITAL OUT
		PCM / STREAM
LEFT		COAXIAL	OPTICAL

RIGHT

TV

IN

AV

S-VIDEO

VIDEO

IN

LEFT

AUDIO

RIGHT

Set the COMP-Y/C switch correctly according to your TV.

•If the TV only accommodates the composite video signal, set the switch to “COMP.”.

•If the TV accommodates the Y/C signals, set the switch to “Y/C” so that you can enjoy better-quality pictures.

•If the TV accommodates the RGB signals, set the switch to “COMP.”, as well as make the unit feed the RGB signals by following the procedure shown below.

How to make the unit feed the RGB signals

The unit cannot output the RGB signals from the SCART connector and the S-video (Y/C) signals from the S-VIDEO jack simultaneously.

In the initial (factory-preset) condition, the S-VIDEO jack is active, while the RGB signals cannot be output.

To make the unit feed the RGB signals, follow the procedure below. Note that the S-VIDEO jack does not feed correct signals when the unit is set to output the RGB signals.

7When the unit is turned on

1Set the COMP.-YC switch to “COMP.”.

2Press and hold down the 7 (STOP) button on the front panel when no disc is inserted or while the unit is stopped. "S OUT" appears in the display window after a few seconds.

(Display window)

3D-PHONIC	PROGRAM RANDOM REPEAT 1A-B
DISC TITLE CHAP.		RESUME THEATER
TRACK	DVD VCD
	EACH
	REMAIN

14