JVC XV-M5GSL manual Resuming playback

Basic operations

To check the playback status

You can see the current disc number, the current selection number (the title/chapter number for DVD VIDEO or track number for SVCD/Video CD/Audio CD), time information (the track or chapter time while stopped, or elapsed track or chapter time during playback) and the transport status (stop, playback, pause, etc.) on the TV screen.

Press ON SCREEN.

Example: for DVD VIDEO

Current disc number	Current chapter	Current transport
	number	status

8.5Mbps DISC 1 TITLE 33 CHAP 33 TOTAL 1:25:58

Transfer rate	Current title number	Current chapter
		time

Note that pressing ON SCREEN again brings up the menu bar under the status bar, from which you can access various functions. See page 20 for details about the menu bar.

To turn off the status bar

Press ON SCREEN repeatedly until the status bar goes off.

Resuming playback

The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position later.

There are three resume modes; ON, OFF and DISC RESUME. The mode is initially set to ON when you purchased the unit.

•You can select the mode using the preference display (see page 28).

When the resume mode is “ON”

When you press 7, the unit stops playback and memorizes the interrupted position. The TV screen shows [RESUME STOP] and the [RESUME] indicator lights up in the display window.

The memory of the interrupted position is not cleared if you turn off the unit.

When you turn off the unit after setting the resume function, simply press 3. The unit is turned on, and playback starts from the interrupted position. If you turn on the unit by pressing STANDBY/ON then press 3, playback starts from the beginning of the disc.

Note that the memory is cleared if you open the disc tray.

To stop playback completely

Press 7.

Hint

If you press one of the 0 buttons during playback, the unit stops playback and the corresponding disc tray opens.

To stop playback temporarily

Press 8.

To resume playback, press 3. (See the following item.)

About On-screen guide icons

You may see the following icons displayed over the picture. They have the following meanings.

: Appears at the beginning of a scene recorded from multiple angles (see page 18).

: Appears at the beginning of a scene recorded with multiple audio languages (see page 18).

: Appears at the beginning of a scene recorded with multiple subtitle languages (see page 18).

When the resume mode is “DISC RESUME”

When you press 7, the unit stops playback and memorizes the interrupted position. The TV screen shows [RESUME STOP] and the [RESUME] indicator lights up in the display window.

The memory of the interrupted position is not cleared if you open the disc tray or turn off the unit.

Hint

The unit memorizes interrupted positions for the last 30 discs played. Storing a new interrupted position will erase the interrupted position stored for the first disc.

To clear the memory

Press 7 while the disc is stopped.

11