Basic operations

5 Press ENTER.

The third page is shown, in which the pull-down menu of the [ANALOG OUT] is already open.

DVD PLAYER SET UP

 

 

DIGITAL AUDIO OUTPUT

STREAM/PCM

ANALOG OUT

 

DOLBY PROLOGIC

D. RANGE CONTROL

2-CH DOLBY SURROUND

ON

 

 

2-CH STEREO

OUTPUT LEVEL

 

MULTI CHANNEL

SELECT

USE 5∞23 TO SELECT, USE ENTER TO CONFIRM

ENTER

 

 

ANALOG OUT options

6 Press 5/∞ to select a desired analog output signal type.

Set this item correctly when you play back a DVD VIDEO disc recorded with surround multichannel audio.

•When connecting to a surround decoder, select [2-CH DOLBY SURROUND].

•When connecting to a stereo amplifier/receiver or TV, select [2-CH STEREO].

•When connecting the unit’s 5.1-channel output, select [MULTI CHANNEL]. Note that you can perform fine tuning for your speakers when [MULTI CHANNEL] is selected (see pages 39 and 41).

7 Press ENTER.

The final page is shown, in which the pull-down menu of the [DIGITAL AUDIO OUTPUT] is already open.

DVD PLAYER SET UP

 

 

DIGITAL AUDIO OUTPUT

DOLBY DIGITAL/PCM

ANALOG OUT

 

PCM ONLY

 

DOLBY PROLOGIC

 

 

DOLBY DIGITAL/PCM

D. RANGE CONTROL

STREAM/PCM

OUTPUT LEVEL

 

 

SELECT

USE 5∞23 TO SELECT, USE ENTER TO CONFIRM

ENTER

 

 

DIGITAL AUDIO OUTPUT options

8 Press 5/∞ to select a desired digital output signal type.

Set this item correctly when you connect the unit to an external surround decoder or D/A converter. (If you do not connect the unit to such a device, you do not have to set this item.)

•When connecting to other digital device, select [PCM ONLY].

•When connecting to a Dolby Digital decoder, select [DOLBY DIGITAL/PCM].

•When connecting to a Dolby Digital decoder or a DTS decoder, select [STREAM/PCM].

9 Press ENTER.

The TV screen returns to the opening display.

To bring up the DVD PLAYER SET UP display later

Press CHOICE for a few seconds until the DVD PLAYER SET UP display appears.

About screen saver function

A television monitor may have an image burned into it if a static image is displayed for a long time. To prevent this, the unit automatically activates the screen saver function if a static picture, such as an on-screen display or menu, is displayed for over 5 minutes.

When the screen saver function is activated, the TV screen gets darker.

Pressing any buttons will release the screen saver function (see page 38).

Basic playback1 Press 0 (or OPEN/CLOSE on the remote control unit) to open the disc tray.2 Place a disc in the disc tray.

With the label side up

• To insert an 8-cm disc, place it in the inner recess.

3 Press 3.

The unit starts playback from the beginning.

If a menu is shown on the TV screen

When inserting a DVD AUDIO, DVD VIDEO, SVCD or Video CD disc, a menu may be shown on the TV screen. From the menu, you can select a desired item to be played back.

For DVD AUDIO/DVD VIDEO

1Press 5/∞/2/3 to select a desired item.

2Press ENTER.

The unit starts playback of the selected item.

For SVCD/Video CD

Press the numeric buttons to select a desired item. The unit starts playback of the selected item.

NOTES

•Do not insert an unplayable disc. (See page 2.)

•When inserting a disc on the disc tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the disc tray is closed, or you may not be able to remove the disc from the unit.

•When a DVD AUDIO disc is played back, the DVD AUDIO indicator on the front panel turns on.

•For a double-sided DVD VIDEO disc, place the disc with the playback side facing down.

Basic

operations

 

 

To change the brightness of the display window

Press DIMMER on the remote control unit.

You can select the display window and the disc tray brightness from three levels, or off. If the brightness is set to off, nothing will be shown on the display.

13