JVC XV-S200BK Getting started, Connections, Before making any connections, To connect to a TV

Getting started

Connections

*In the following description, “TV” may be substituted with “monitor” or “projector.” *Before using the unit, you have to connect the unit to a TV and/or amplifier.

Before making any connections

•Do not connect the AC power cord until all other connections have been made.

•Since different components have different terminal names, carefully read the instructions supplied with the component you are going to connect.

To connect to a TV

English

You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio outputs to your separate audio equipment. (See the following pages.)

The unit

DIGITAL OUT		VIDEO OUT
PCM / STREAM		COMPONENT
	Y		PB	PR	VIDEO OUT SELECT
COAXIAL					S-VIDEO COMPONENT
					AND
					VIDEO
S-VIDEO	VIDEO		RIGHT	LEFT

Yellow	White
	Red	Yellow
	Audio/Video cable	White
		Red
	(supplied)
	S-video cable
	(not supplied)

TV

IN

S-VIDEO

VIDEO

LEFT

AUDIO

RIGHT

Getting started

Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.

•If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo audio output to monaural.

•If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the S-video cable (optional) in addition to the (standard) video connection to get better picture quality.

Enabling the S-VIDEO output or the VIDEO output

For your TV connection, you can use either the S-video output or the component video output at a time.

When you use the S-VIDEO jack or the VIDEO jack, set the VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch on the rear panel to “S-VIDEO AND VIDEO”. Then, “S-VIDEO” appears on the display window for a few seconds.

(Display Window)

VCDVD GROUP TITLE TRACK CHAP 1 A-B

PROGRAM

RANDOM

Note that you must change the switch position while the unit is stopped, or the unit power is off. Otherwise, the changed setting is not effective.

NOTES

•Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may cause a monitor problem when playing back a copy-protected disc.

•Connect the unit to an NTSC television. Do not connect the unit to a PAL television.

•When you use the S-VIDEO or VIDEO signal connection, no picture will appear if setting is made to COMPONENT. In this case, switch the setting to S-VIDEO.

13