JVC Operating external components with the remote control, Operating the TV

Operating external components with the remote control

The buttons described below are used on pages 11 and 12.

TV/VIDEO

TV VCR

TV VOL CHANNEL

TV	Remote control
VCR	mode selector
	(play button)

ENTER

REC

Number buttons

TV RETURN 100+

NOTE

•Manufacturers’ codes are subject to change without notice.

•Set the codes again after replacing the batteries of the remote control.

Operating the TV

7To set the manufacturer’s code

You can operate a JVC TV without setting the manufacturer’s code.

1 Slide the remote control mode selector to TV.

2 Press and hold TV.

Keep the button pressed until step 4 is finished.

3 Press ENTER.

4 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits).

Examples:

For a Hitachi TV:

Press 0, then 7.

For a Toshiba TV:

Press 2, then 9.

Manufac-	Code	Manufactur-	Code
turer		er
JVC	01	Nordmende	13, 14, 18, 26 – 28
Akai	02, 05	Okano	09
Blaupunkt	03	Orion	15
Daewoo	10, 31, 32	Panasonic	16, 17
Fenner	04, 31, 32	Philips	10
Fisher	05	Saba	13, 14, 18, 26 – 28
Grundig	06	Sanyo	05
Hitachi	07, 08	Schneider	02, 05
Inno-Hit	09	Sharp	20
Irradio	02, 05	Sony	21	– 25
Magnavox	10	Telefunken	13, 14, 18, 26 – 28
Mitsubishi	11, 33	Thomson	13, 14, 18,
			26	– 28, 30
Miver	03	Toshiba	29
Nokia	12, 34

5 Release TV.

If there is more than one code listed for corresponding brand, try each one until you enter the correct one.

7Operation

Aim the remote control at the TV.

IMPORTANT

Before using the remote control to operate a TV;
• Set the remote control mode selector to TV.
The following buttons are available:
	TV:	Turns TV on and off.
TV VOL +/–:		Adjusts the volume.
TV/VIDEO:		Selects the input mode (either TV or
		VIDEO).
CHANNEL +/–:		Changes the channels.
1-10, 0, +10 (100+): Selects the channel.
TV RETURN:		Alternates between the previously selected
		channel and the current channel.

11