Basic operations

The buttons on the remote control are used to explain most of the operations in this manual. You can use the buttons on the center unit same as on the remote control for operations unless otherwise noted.

IMPORTANT

Before using the remote control for the following operation;

• Set the remote control mode selector to AUDIO.

The buttons described below are used on pages 17 to 20.

FAUDIO

MUTING

DVD FM/AM AUX TV SOUND

Source

 

selecting

 

buttons

 

AUDIO VOL

Remote control

AUDIO

 

mode selector

CursorENTER

(3/2/Y/5)/

ENTER

SCAN MODE

TREBLE

SMART

SLEEP DIMMER S.SETUP

S.WFR CENTER L-SURR.-R

STANDBY/ON

lamp

STANDBY

VOLUME

PHONES

Turning the system on/offOn the remote control:Press F AUDIO.On the center unit:Press F.

When DVD is selected as the source (A pg. 18), the following messages will appear on the TV screen.

•“OPEN”/“CLOSE”:

Appears when opening or closing the disc tray.

•“NOW READING”:

Appears when the system is reading the disc information.

•“REGION CODE ERROR!”:

Appears when the Region Code of the DVD VIDEO does not match the code the system supports. The disc cannot be played back.

•“NO DISC”:

Appears when no disc is loaded.

•“CANNOT PLAY THIS DISC”: Appears when unplayable disc is loaded.

NOTE

•Both the STANDBY and STANDBY/ON lamps turn on when the power is turned off and turns off when the power is turned on.

•The power supply to the subwoofer is linked to the center unit. The POWER ON lamp on the subwoofer lights green when the power is turned on.

•When the wireless receiver unit does not receive any radio wave for approximately 10 minutes, the unit automatically turns off.

•Even though the wireless receiver unit is turned off, the unit automatically turns on by receiving the radio wave from the center unit.

•A small amount of the power is consumed even when the power is turned off (center unit only). This is called standby mode and the STANDBY lamp lights in this mode. Unplug the power cord from the AC outlet to turn the power off completely.

•You can also turn on the system by pressing the following buttons;

•OPEN/CLOSE on the remote control or 0 on the center unit

•One of the source selecting buttons on the remote control

•3on the center unit. You can use the same buttons on the remote control except after pressing FM/AM.

17