Pentax AF-360FGZ manual Wireless High-SpeedSync Photography

Firstly, set the wireless mode and channel of the AF360FGZ, and register the channel on the camera.

Turn the camera off and then attach the AF360FGZ to the hot shoe of the camera.

Set the power switch of the flash unit to (WIRELESS).

Set the wireless mode switch to (S), so that SLAVE is displayed in the upper right corner of the LCD panel.

00_AF360FGZ.book Page 43 Tuesday, June 13, 2006 12:09 PM

Wireless High-Speed Sync Photography

(Using the AF360FGZ in Combination with a Built-in Flash Unit)

1

•You cannot set the flash unit to SLAVE while the exposure metering timer is on (while information relating to aperture etc. is displayed in the

viewfinder).

Slide down the setting switch to the (yellow dot) to display the channel on the LCD panel.

Press the channel button (CH) and select a channel from 1CH to 4CH.

Slide the setting switch back up to the (white dot).

43