00_AF360FGZ.book Page 39 Tuesday, June 13, 2006 12:09 PM

When Attaching the AF360FGZ to the Camera for Control Flash

Main flash

Control flash only: not used for main flash

(Preparation of Flash Unit Attached to Camera)

1 Firstly, set the wireless mode and channel of the AF360FGZ attached to the camera, and register the channel on the camera.

Attach the AF360FGZ to the hot shoe of the camera after turning the camera off.

Set the power switch of the flash unit to (WIRELESS).

Set the wireless mode switch to (C), so that

CONTROL is displayed in the upper right corner of the LCD panel.

Slide down the setting switch to the (yellow

dot) to display the channel on the LCD panel.

Press the channel button (CH) and select a channel from 1CH to 4CH.

Slide the setting switch back up to the (white dot).

39

Page 41
Image 41
Pentax AF-360FGZ When Attaching the AF360FGZ to the Camera for Control Flash, Preparation of Flash Unit Attached to Camera