Pentax AF-360FGZ manual Turning the Power On

00_AF360FGZ.book Page 13 Tuesday, June 13, 2006 12:09 PM

Turning the Power On

œŦŢťźġŭŢŮű

Sliding the power switch to the (ON) position will turn on the power. The ready lamp will light up when the flash is charged. Sliding it to the (OFF) position will turn off the power.

If charging time takes more than 20 seconds, the batteries have been exhausted and should be replaced with new batteries. If the flash unit is used with exhausted batteries, the settings may return to their default configuration.

lTurn the camera on before turning the flash unit on.

lThe WIRELESS position of the power switch is used for wireless mode and slave flash lighting. For details, see the explanations for each function.

ÝWireless mode (Page 35 - 46)

ÝSlave flash (Page 47 - 48)

13