Procedure
1 Slide the setting switch up.
2 Press the LCD panel illumination button (LIGHT) for 2 seconds or more. SLAVE1 will be displayed.
3 Pressing1 and 2. the select button (S) switches between 1: When photographing in wireless mode
00_AF360FGZ.book Page 49 Tuesday, June 13, 2006 12:09 PM
nSlave Mode Setting
To properly control the slave flash, it is necessary to set the slave mode settings.
2 seconds | 2: When photographing with slave flash |
or more | • The flash will not fire properly if the slave mode |
| |
| was set to the wrong mode. It may not fire at all |
| or may fire simultaneously with the control flash. |
| Press the LCD panel illumination button (LIGHT) |
| 4 to finish setting. |
| • In SLAVE2, fluorescent lamps flicker may contribute |
| to flash unit’s erroneous firing on rare occasions. |
49
