Pentax AF-360FGZ manual Preparation of Flash Unit Attached to Camera

00_AF360FGZ.book Page 41 Tuesday, June 13, 2006 12:09 PM

When Using Both an AF360FGZ Attached to the Camera and a Separated Flash Unit as Main Flashes

Use both flash units as main flashes

(Preparation of Flash Unit Attached to Camera)

1 Firstly, set the wireless mode and channel of the AF360FGZ attached to the camera, and register the channel on the camera.

Attach the AF360FGZ to the hot shoe of the camera after turning the camera off.

Set the power switch of the flash unit to (WIRELESS).

Set the wireless mode switch to (M), so that MASTER is displayed in the upper right corner of the LCD panel.

Slide down the setting switch to the (yellow dot) to display the channel on the LCD panel.

Press the channel button (CH) and select a channel from 1CH to 4CH.

41