Pentax AF-360FGZ manual Auto Check Display

00_AF360FGZ.book Page 9 Tuesday, June 13, 2006 12:09 PM
	￿
￿	￿
	￿
￿
￿	￿
￿	￿
￿	￿
￿
	￿

When in poorly lit locations and the LCD panel cannot be seen, pressing the LCD panel illumination button (LIGHT) will illuminate the panel for about 10 seconds. Pressing it again will turn off the illumination.

•The camera's LCD panel lights up also when you press the LCD illumination button (LIGHT) and the exposure metering timer is on for the following camera.

MZ-S

Auto Check Display

If the correct flash output is obtained, the flash mode indicator and ( ) in the viewfinder will begin blinking. If the auto check display does not blink, the flash output is insufficient. Verify the effective flash range (refer to page 77) and adjust the distance to the subject, or open the aperture further.

Even if the auto check display is blinking, the flash output may be incorrect if the subject is too close.

• Depending on the combination of flash mode and camera, the auto check display may not display correctly

9