
00_AF360FGZ.book Page 46 Tuesday, June 13, 2006 12:09 PM
Slide the setting switch back up to the (white dot).
When you turn the camera on and press the shutter release button halfway down, the channel is registered on the camera.
2 Next, set the channel of the separated (wireless) flash unit to the same channel as the flash unit attached to the camera.
Place the other AF360FGZ in the desired position.
Set the power switch of the flash unit to (WIRELESS).
Set the wireless mode switch to (S), so that
SLAVE is displayed in the upper right corner of the LCD panel.
Slide down the setting switch to the (yellow
dot) to display the channel on the LCD panel.
Press the channel button (CH) and select the same channel that the flash unit attached to
the camera has been set to.
Slide the setting switch back up to the (white dot).
•The two flash units must be set to the same channel, otherwise the separated flash unit will not fire.
3 Set the sync mode switch of the wireless flash
unit to leading curtain sync ().
4 Set the exposure mode of the camera to manual exposure and the shutter speed faster than X- sync speed.
• If the shutter speed is the same or slower than the
5sync mode.
46