Pentax AF-360FGZ manual nContrast Control Sync Flash, Procedure

Turn on the flash units to be used in combination.

00_AF360FGZ.book Page 33 Tuesday, June 13, 2006 12:09 PM

nContrast Control Sync Flash

Refer to page 29 for the features and conditions of use of this sync mode.

•Refer to “Connecting the AF360FGZ with the Extension Cord” on page 56 on using the AF360FGZ detached from the camera.

￿	￿
￿	￿

Procedure

1 Turn on the power switch.

2 Set the sync mode switch to contrast-control

( ).

3 Set the zoom position. (The setting method differs according to your camera and lens. Refer to page 18.)

• If the AF360FGZ is closer to the subject than the flash unit to be used in combination, use (M.Zoom) to set the zoom position to a shorter

4lens focal length.

• If the camera's built-in flash unit is part of the combination, pop up the built-in flash.

5 Confirm that the subject is within the effective flash range and the ready lamp is lit. Then take a picture.

33