Pentax AF-360FGZ manual nTTL Auto Flash, Procedure

00_AF360FGZ.book Page 24 Tuesday, June 13, 2006 12:09 PM

nTTL Auto Flash

Refer to page 22 for the features and conditions of use of this flash mode.

￿	￿	￿
	￿	￿

Procedure

1 Turn on the flash unit.

	Press the flash mode button (MODE) until (TTL)
2 is displayed on the LCD panel.
3	Set the sync mode switch to leading curtain sync
	(	), trailing curtain sync (		), or
	contrast-control (		), according to the

subject. (Refer to page 29.)

4 Set the zoom position. (The setting method differs according to your camera and lens. Refer to page 18.)

5 Confirm that the subject is within the effective flash range and the ready lamp is lit. Then take a picture.

•In the following cameras, if the correct flash

output is obtained, the flash mode indicator and ( ) in the viewfinder will blink.

35 mm single lens reflex cameras except for SF7/ SF10, 672, 645N2, 645N, 645, LX, Super A/ Super Program

For details, refer to “Auto Check Display” on page 9.

24