Pentax AF-360FGZ manual Flash Mode, Camera

00_AF360FGZ.book Page 58 Tuesday, June 13, 2006 12:09 PM

Flash Mode	Camera	Notes
TTL Auto Flash	672	- In trailing curtain sync or contrast control sync mode, the flash mode
(TTL)		will automatically be switched to (TTL) when you press the shutter
		release button halfway down, even if you have set it to manual (M).
	645N2, 645N,	- When the exposure mode is Programmed AE, Shutter Priority AE, or
	Z/PZ series, MZ/ZX	Aperture Priority AE, the flash mode will automatically be switched to
	series (except MZ-M/	(TTL), even if you have set it to manual (M). You can actually use Manual
	ZX-M), SFXN/SF1N,	flash mode (M) when the camera exposure mode is set to Manual (M).
	SFX/SF1	- In trailing curtain sync or contrast control-sync mode, the flash mode
		will automatically be switched to (TTL) when you press the shutter
		release button halfway down, even if you have set it to manual (M).
		- If the camera exposure metering timer is on (information is displayed in
		the viewfinder), you cannot select (A) or (M) by pressing the flash mode
		button (MODE).
		- You cannot use (TTL) with the SF7/SF10.
	645, Super A/	-
	Super Program, LX
Auto Flash (A)	Aperture setting	- Under the following conditions, autofocus cameras can also use (A).
	capable Pentax single	- The camera exposure mode is set to manual exposure.
	lens reflex cameras	- The camera exposure metering timer is off.
		- With the following combinations of cameras and exposure modes, you
		cannot photograph correctly if the aperture is set to a value brighter than F2.
		Camera: Z-5P, Z-5, Z-1P/PZ-1P, Z-1/PZ-1, SFXN/SF1N, SF7/SF10, SFX/SF1
		Exposure mode: Programmed AE and Shutter Priority AE modes
Manual Flash	Aperture setting
(M)	capable Pentax single	-
	lens reflex cameras

58