Pentax AF-360FGZ Supported Functions for Pentax Cameras, nCameras that Support Each Flash Mode

00_AF360FGZ.book Page 57 Tuesday, June 13, 2006 12:09 PM

Supported Functions for Pentax Cameras

nCameras that Support Each Flash Mode

Cameras that support each of the flash modes are listed below.

Please note that functions related to each flash mode differ. Refer to "Functions Related to Each Flash Mode" (page 61 - 68).

Flash Mode	Camera	Notes
P-TTL Auto	*ist DL2, *ist DS2,	- When the exposure mode is Programmed AE, Shutter-Priority AE, or
Flash (P-TTL)	*ist DL, *ist DS, *ist D,	Aperture-Priority AE, even if you set the flash mode to manual (M), it
	*ist, MZ-L/ZX-L/MZ-6,	will automatically switch to (P-TTL) while the camera's exposure meter
	MZ-S	is operating (while information is being displayed in the viewfinder). You
		can actually use Manual flash mode (M) when the camera exposure
		mode is set to Manual (M).
		(With the *ist DS2, *ist DS, and *ist D, if the aperture of the lens is in a
		position other than A, the flash mode will switch to TTL.)
		- In trailing curtain sync or contrast control sync mode, the flash mode
		will automatically be switched to (P-TTL) when you press the shutter
		release button halfway down, even if you have set it to manual (M).
		- If the camera exposure metering timer is on, you cannot select (A) or
		(M) by pressing the flash mode button (MODE).
		- Although (P-TTL) is displayed in the following cameras, the actual
		photograph is taken with (TTL).
		LX, Super A/Super Program, 645

57