Jwin JX-43000D instruction manual Programmed Play

Models: JX-43000D

1 18
Download 18 pages 12.29 Kb
Page 10
Image 10

Notes on handling compact discs

-Do not expose the disc to direct sunlight, high humidity or high temperatures for ex- tended periods of time.

-Discs should be returned to their cases after use.

-Do not apply paper or write anything on the disc surface.

-Handle the disc by its edge. Do not touch the playing surface (glossy side).

-Fingerprints and dust should be carefully wiped off the playing surface of the disc with a soft cloth.

Wipe in a straight motion from the centre to the outside of the disc.

-Never use chemicals such as record clean- ing sprays, antistatic sprays or fluids, ben- zene or thinner to clean compact dises.

Temporarily stopping play

Press the button. The CD PLAY indicator blinks.To resume play, press the button again.

Skip play

To skip to track 6 while track 3 is playing,press the button repeatedly until 6 appears on the display. To skip back to track 3 while track 6 is

playing, press the button repeatedly until 3 appears.

Search(forward/reverse)

If the or button is pressed during play, the player will search at high speed in the forward or reverse direction while the button is being pressed. When the button is released normal play will continue.

Repeat play

Press the REPEAT button before or during play. Each time the button is pressed,the repeat mode changes.

PROGRAMMED PLAY

Up to 20 tracks on a disc can be programmed for play in any order.

-To begin the programming procedure, select CD function first.

-The same track can be programmed more than once.

-Load a disc that you want to programme be- fore starting programmed play.

1.Press the button if necessary.

2.Press the MEMORY button

3. Select a track by

using the

and

buttons.

 

 

4.Press the MEMORY button.

5.Repeat steps 3 - 4 to programme additional tracks.

6.Press the button to start play. When all programmed tracks have been played, the player stops automatically.

-The programme contents are retained in memory.

-To cancel programmed play, press the button twice.

Checking the programme

Press the MEMORY button twice in the stop mode, the programmed tracks sequentially appear on the display.

Changing the programme

To add a new selection to a programme:

1.In the stop mode, press the MEMORY button.

2.Select the track number as explained above.

3.Press the MEMORY button.

WHAT TO DO IF...

If an abnormal display indication or an operating problem occurs, dcisconnect the mains lead and remove all batteries. Wait at least 5 seconds, then reconnect the mains lead and reinstall the batteries. Resume the operation.

9

Page 10
Image 10
Jwin JX-43000D instruction manual Programmed Play