HEADPHONE AND HI FI CONNECTION
BASIC DISC PLAY
Listening with the headphones
Connect the plug of the stereo headphones ( included ) into the PHONES ( GREEN ) socket.
Caution: Avoid excessive volume levels for a long period of time when using headphones, as this may impair your hearing.
Connecting to component audio systems
Connect the stereo connection cable ( not included ) into the LINE OUT ( BLACK ) socket of the unit and the CD / AUX inputs of an audio system.
Note: Always switch the power off before making any connections between the player and another unit.
NOTE: This player plays not only commercial CDs but also
6
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
3 | 2 |
5
4
1.Connect the Headphones to the PHONES ( GREEN ) socket.
2.Slide the OPEN switch to open the CD compartment lid.
3.Adjust the VOLUME to minimum.
4.Insert the disc with the label side facing up.
5.Close the lid securely until a click is heard.
6.Press the PLAY button to start playing.
7.Adjust VOLUME for desired level.
Caution:
Avoid excessive volume levels while listening to sound for a long period of
TO PHONES SOCKET |
TO CD/AUX |
INPUT |
TO LINE OUT SOCKET |
Remove the disc
Hold the edge and gently press the center pivot as illustrated, then pick up the disc.
Caution:
Wait for the disc to stop rotating before pressing the OPEN button.
Note:
This unit can play 3 inch ( 8cm ) single CD’s without an adaptor. Do not use a CD single adaptor for these discs.
time when using headphones.
To Emphasize the bass sound
Set the DBBS switch to the ON position.
Note: The bass boost performance will be dependent on the VOLUME control setting.
Turning Power on and off
This unit has no ON / OFF switch. To turn on and off, press the following buttons.
To turn on : Press PLAY/PAUSE ( playback starts )
To turn off : Press STOP button once for standby mode. Press STOP button again to turn off the power.
Auto power-off function
When the unit is stopped (standby mode ) for approximately 1 minute, the power is automatically turned off.