Jwin JX-CD5500 Operating Instruction, Listening to the Radio Storing Preset Stations Power ON/OFF

OPERATING INSTRUCTION

LISTENING TO THE RADIO

STORING PRESET STATIONS

POWER ON/OFF

1.Connect the AC cord, make sure the voltage is correct and then press the POWER button (1) or (31) to turn on the unit.

2.Press the FUNCTION button (3) or (32) to select your desired mode (CD/AUX/TUNER).

3.Press the POWER button (1) or (31) to turn off the unit.

POWER

FUNCTION

POWER

1.Press the POWER button (1) or (31) to turn on the unit then press the FUNCTION button (3) or (32) to select RADIO mode.

FUNCTION

2.Press the STOP/BAND button (11) or (29) for AM or FM band.

Example : FM mode

1.Tune to the station you wish to store by pressing TUNING UP or DOWN button (15) or (33).

The unit enables you to program 10 stations of FM and 10 stations of AM band.

2. Press the PROGRAM button (16) or (34).

(“MEM” flashing)

BASIC OPERATION

Volume Control

Once the required mode has been located, adjust the VOLUME button (14) or (37) up or down to the desired level.

3.Press the TUNING Up or Down button (15) or (33) to tune to the desired station.

3. Press the FOLDER UP or FOLDER DOWN

button (5)/(6) or (28)/(36) repeatedly to set the

desired preset station number. (“MEM” still

flashing)

Preset Equalization
To select desired sound effect, press the EQ button (2) repeatedly	EQ
to cycle through the preset EQ show on the display — CLA
(Classic), ROCK, POP.

FM Stereo/Mono

Slide the FM Stereo/Mono switch (27) to choose between FM stereo (2-channel) reception or FM mono (1-channel) reception. If the FM stereo reception is too noisy, choose the FM mono reception setting instead.

AUX Operation

To listen to audio signals from an external unit through this unit.

1.Connect the right (23) and left (24) plugs from the auxiliary unit.

2.Press the FUNCTION button (3) or (32) select to AUX mode.

3.Operate the auxiliary unit by following it’s owners manual.

Manual Tuning - Press and hold the TUNING UP or DOWN buttons (15) or (33) until the display approaches your desired station. Then tap the buttons repeatedly until the display shows the exact frequency.

Auto tuning - Press the TUNING UP or DOWN buttons momentarily and release. The tuner will move up or down to the next available station.

4.When finished listening, press the POWER button (1) or (31) to turn off the unit.

4.Press the PROGRAM button (16) or (34). The station is stored. (“MEM” steady on)

5.To store other stations, repeat above steps.

RECALLING PRESET STATION

Press the FOLDER UP or FOLDER DOWN button (5)/(6) or (28)/(36) on main unit or remote control repeatedly to select the desired station.

7 8