Jwin Z1055 instruction manual General Setup, Speaker Setup

PORTABLE DVD PLAYER V10M10_IM_EN_09182006

SETTING UP YOUR DVD PLAYER

General Setup Page

1.TV DISPLAY: Normal/PS, Normal/LB, Wide

a.Normal/PS: “PS” stands for “Pan Scan”. Select this option when the unit is connected with a normal (4:3 aspect ratio) TV. If a wide-screen image is displayed on the screen, some left and right edges of the image are cut out automatically.

b.Normal/LB: “LB” stands for “Letter Box”. Select this option when the unit is connected with a normal (4:3 aspect ratio) TV. If a wide-screen image is displayed on the screen, the displayed image is automatically fit into the screen, and the image will be displayed with some degree of distortion.

c.Wide: Select this option when the unit is connected to a wide-screen (16:9 aspect ratio) TV.

2.TV TYPE: NTSC / PAL

a.NTSC: When connected to a NTSC TV system, this option must be selected to display an image correctly.

b.PAL: When connected to a PAL TV system, this option must be selected to display an image correctly.

3.ANGLE MARK: ON / OFF

a.ON: If selected, it will show the angle mark on the screen when playing a DVD recorded with the multi-angle view. This only works when there is an angle mark on the disc.

b.OFF: If selected, the angle mark will not be shown on the screen.

4.OSD LANG: English / Spanish / German / French / Italian

a.Used to change the on-screen display language.

5.SCREEN SAVER: ON / OFF

a.ON: Activate the screen saver

i.The screen saver image appears when the unit stops or the image is motionless for approximately 1 minute. This saver can keep the screen from being damaged.

b.OFF: Disable the screen saver

Speaker Setup Page

1.Speaker Setup: LT/RT, STEREO

a.LT/RT: Select to hear the sound in the theatrical Downmix mode.

b.STEREO: Select to hear the sound in the stereo Downmix mode.

28