1.8NEVER OPERATE THE BLENDER USING ATTACHMENTS NOT SOLD BY BLENDTEC
The use of any unauthorized attachments may cause fire, electric shock, and/or injury and will void the warranty.
1.9CONTAINER MUST BE PROPERLY IN PLACE WHILE APPLIANCE IS OPERATING
1.10BLADES ARE SHARP! HANDLE CAREFULLY!
1.11WHEN BLENDING HOT LIQUIDS, REMOVE CENTER PIECE OF LID
1.12POWER CORD PRECAUTIONS
•NEVER operate with a damaged cord or plug. (If the supply cord is damaged it must be replaced by the manufacturer, or authorized service agent to avoid a hazard
•DO NOT permit the cord to hang over the edge of the work surface.
•NEVER use an extension cord with the unit.
•Unplug the blender motor when not in use; before changing blender loca- tions; or cleaning.
1.13NEVER ATTEMPT TO REPAIR THE POWER UNIT
Never remove the blender motor cover. The blender motor does not contain self- adjustable or serviceable parts. A qualified service agent must make all service adjustments. Removing the cover or attempting to service the blender will void the warranty.
1.14 TURN THE POWER SWITCH OFF WHEN NOT IN USE
The Power Switch (ON/OFF switch) is located on the back of the blender motor cover.
1.15AVOID TOUCHING THE BLENDER DRIVE SOCKET AFTER EXTENSIVE USE.
The blender drive socket may become hot after numerous cycles.
1.16CLOSE SUPERVISION IS NECESSARY WHEN APPLIANCE IS USED BY OR NEAR CHILDREN.
1.17THE TOTAL BLENDER IS INTENDED FOR HOME USE ONLY! ANY USE OF THE TOTAL BLENDERTM FOR COMMERCIAL PURPOSES VOIDS ALL WARRANTIES.
SAVE THESE INSTRUCTIONS
SECTION 2
SAVE ALL PACKAGING MATERIALS AND INSTRUCTIONS FOR FUTURE USE.
2.1UNPACKING YOUR BLENDER
You should have received the following items:
•TOTAL BLENDERTM motor base
•Blender jar with lid
•Recipe book
1.Remove blender motor, blender jar and lid from packaging.
2.Unwind the power cord.
3.Check for any packing material that may have blocked ventilation holes in the blender motor.
4.Inspect all items to ensure no damage occurred in shipment.
5.If any damage has occurred contact your Blendtec service agent immediately.
2.2 RECORDING YOUR SERIAL NUMBER AND DATE OF PURCHASE
Record your blender motor serial number and date of purchase in the space below. You will need these when contacting Blendtec for service or questions.
Motor Serial #:
____________________________________________________
(Found on bottom of motor base) Date of Purchase:
____________________________________________________
Purchased From
____________________________________________________
2.3 REGISTRATION OF YOUR BLENDER
Register online at www.blendtec.com (select “Product Registration”
under the Support button) or return the registration card to the address provided.
