Kaidan TM-400 I

Page - 11

If you have been using eMCee succesfully but are now having communica-

tion pr oblems, you should try discarding eM Cee’s preferences.

F or Macintosh users: open your System Fo lder , open the Prefer ences folder

and locate eMCee’s preference file, discar d the file.

For PC users: the preference f ile for eMCee is in the same folder as the ap-

plication, discard the f ile. Once you have discarded the preferences, you will

need to restore the preferences for your specific Kaidan model.

I HAVE DONE EVERTYTHING BUT EMCEE CANNOT SEE THE CONTROLLER?

If y ou ha ve read through this appendix and ha v e not a so lution to y our prob-

lem, please email: support@kaidan.com or call 215-364-1778 Mon-Fri 9am to 6pm

EST.

Sincerely,

The Kaidan Support Team

M-2500M-2500

M-2500 X-Axis Y-Axis

Steps per Rev 20000 20000

Intial Velocity 100 100

Slew Velocity 500 300

Ramp Slope 10 10

Move Speeds 500 300

Step Resolution Full

MDT-19MDT-19

MDT-19 X-Axis Y-Axis

Steps per Rev 14165* 0

Intial Velocity 100 0

Slew Velocity 300 0

Ramp Slope 15 0

Move Speeds 300 0

Step Resolution Full 0

*Note - This value has been calibrated specifi-*Note - This value has been calibrated specifi-

*Note - This value has been calibrated specifi-

cally for your unit, you will find this value oncally for your unit, you will find this value on

cally for your unit, you will find this value on

the underside of the unit.the underside of the unit.

the underside of the unit.