Kairak KRES General, Installation, Serial No Electrical Refrigeration Specifications, Unpacking

KAIRAK Page 2

GENERAL

Kairak KRES model refrigerated equipment stand units are available in many lengths from 36 to 120 inches long. These units are available as a refrigerated or freezer storage compartment. The condensing systems are designed to be installed with minimal clearance to walls or other equipment.

These models are available as self-contained or remote. Standard features on these models include electronic temperature control, all stainless steel construction (galvanized back), 4-inch casters for self-contained models and 6-inch legs for remote models, double or single wide drawers and exterior dial thermometer. Available options include, marine or flat top, stainless steel back, 6-inch casters and drawer locks. Some options are not available on all models.

INSTALLATION

Prior to installation, test the electrical service to assure that it agrees with the specifications of the equipment marked on the data plate. The data plate is located inside the storage cabinet. (See Fig. 1)

Serial No.

Electrical &

Refrigeration

Specifications

SAMPLE

Fig. 1

UNPACKING

Inspect equipment for shipping damage prior to installation. If shipping damage is found, save the packing materials and contact the carrier within 15 days of delivery. Some components are packed and shipped inside the storage cabinet to avoid damage during shipment. Remove these items from the cabinet and remove packing materials. See “Installing Parts Shipped Loose” for installation instructions. Cut the plastic ties holding the shelves in place.

- 2 - IM-ES-REV 5-09-06.doc5-09-06