Kaito electronic KA800 manual SET the MW AM Step & Alarm Time, SET MW AM K or 10K

SET THE MW (AM) STEP & ALARM TIME

SET MW (AM) STEP (9K or 10K)

When in power off mode, Press & Hold the <M+/FOL+/DATE> button until your desired MW (AM) step (10K or 9K) appears in the display. Repeat again to change the MW (AM) tuning step. Important: In the USA, the step for AM stations is 10K Hz.

You will miss stations if you do not have the right step set.

SET COUNTDOWN ALARM TIME (90 minutes countdown alarm)

When in the power off mode, long Press & Hold the <REC> button and rotate the <Tuning Knob> counter-clockwise at the same time. The minutes and seconds will appear in the bottom left corner of the display instead of date being displayed and there is a running wait symbol <u> to the right of the seconds. Then release the <REC> button and continue rotating the <Tuning Knob> counter-clockwise or clockwise to select your desired alarm time (01~90 minutes). When you have finished, the alarm time then counts down in the display. At the set alarm time, the alarm clock then rings. It will ring for about 20 seconds. You can press any key to exit the alarm clock mode.

If you want to cancel the alarm, before reaching the alarm time, rotate the <Tuning Knob> clockwise until the time 00 minutes and then the date appears in the display.

20