Copies of the I/B. Please reproduce them without any changes except under special instruction from Team International BELGIUM. The pages must be reproduced and folded in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm height). When folding, make sure you keep the good numbering when you turn the pages of the I/B. Don’t change
Fax +32 2 359 95 50 the page numbering. Keep the language integrity. Print only what is inside the frame.
Caution: Avoid contact with the cut edges of the can or lids, as they are sharp. Carefully remove the lid from the magnet and discard immediately.
Note: the quantities of the cans opened each time do not exceed 5 pieces
7.You may stuff excess lengths of cord into the back storage of the unit and feed the cord through the notch for convenient storage.
Note: Can Opening tips
1.This can opener should not be used to open cans designed to be opened by another method, such as a pull tab,
2.If there is a dent in the rim of a can, open the other end or start the cutting action just beyond the dent. Cans with heavy seams, uneven rims or odd shapes may cause the can opener to stall, If this occurs, turn the can slightly by hand to aid the cutting action.
3.Frozen juices or foods in cardboard cans should be opened as soon as they are removed from the freezer.
4.Aluminum lids will not stick to the magnet.
TO OPEN BOTTLES
1.To open a bottle, grasp it and position the cap under the metal hook part in the bottle opener (see Fig. 4).
Important: Be sure the metal hook part is not under the bottle neck, or the glass may break. Hold the can opener with one hand and pull down to pop the cap off with the other one.
2.The bottle opener at the front of the unit will only remove metal bottle caps. Do not use it for
6 | USK DO 36918 - 110808 |
Assembly page 6/20
