SHORT CORD INSTRUCTIONS
A short power supply cord is provided to reduce the hazards resulting from becoming entangled in, or tripping over a longer cord. Extension cords may be used if care is exercised in their use.
•The electrical rating of the extension cord should be at least that of the appliance. If the electrical rating of the extension cord is too low, it could overheat and burn.
•The resulting extended cord should be arranged so that it will not hung over the counter top or tabletop where it can be pulled on by children or tripped over.
SPECIFICATIONS
Electrical requirements | 115V AC 60Hz, 1PH |
Fuse type | AC 250V, 3.15A,∮5 x 20 |
Ice Making Capacity | |
Ice Sizes | Small, Large |
Ice Storage Capacity | 1.0 kg / 2.2 lb. |
Compressor | High efficiency, CFC free |
Refrigerant gas | R134a |
Water Reservoir | 1.5 L / 50 Oz. |
Dimensions | 350 x 305 x 360 mm / 13 ¾ x 12 x 14 ¼ in. |
Net Weight | 13.0 kg / 28.6 lb. |
BEFORE USE |
|
During transportation, DO not angle the cabinet over 45°
Do NOT put the ice cube maker upside down. Otherwise Problems could occur in the compressor and sealed System.
The ice maker should be placed horizontally on a properly leveled surface.
To ensure proper ventilation, it is important to set a minimum space of 150mm / 6 in. at the top, at the back and on each side for your ice cube maker.
Before using the Ice maker for the first time, please wait 2 hours after putting it in place to start the appliance.
Clean the inner liner, ice collecting tray, water box, ice shovel and evaporator frequently (see Cleaning and Care section).
3USK ICBM 30116/30155 - 090716