operation though, when the temperature in cavity will reach above 5°C/ 40°F
CLEANING AND CARE
•If the compressor stops for any reason such as water shortage, too much Ice, power off, etc... Do not start the system right away, wait 3 minutes, and then
•Always add fresh water before starting ice production at initial installation or after long shut off periods.
•To ensure the cleanliness of the ice cubes, water in the water reservoir should be replaced every 24 hours
•Always unplug the appliance before cleaning it.
•Clean the inner liner, ice collecting tray, water box, ice shovel and evaporator frequently. Please do not use chemicals improper for parts in contact with food. Rinse thoroughly before starting the appliance again.
•Wipe the appliance’s housing with kitchen paper or a soft damp cloth.
•NEVER immerse the appliance in water or any other liquid.
•NEVER put any part of the appliance in the dishwasher.
•Do NOT use abrasive products.
•If you see a decrease in performance, limescale could be the cause. Please use a solution with water and descaling agent formulated for coffee makers (do NOT use vinegar). Start the ice cube maker and let the solution run through for 5 minutes. Stop the appliance for 5 minutes. Start the appliance again for 5 minutes and stop the appliance again. Remove all the solution by using the drain plug at the back. Once done, rinse thoroughly, repeating the whole operation twice or three times, this time with clean water only. Do NOT consume the ice that might have been done with the descaling solution.
•When you know that you will not use the appliance for a long period, remove the drain plug and let the water come out of the water tank. Screw the drain plug back in place after the water has been drained.
6USK ICBM 30116/30155 - 090716
