Kalorik USK ICBM 30155 manual Troubleshooting, Problem, Possible Cause, Suggested Solutions

￿

TROUBLESHOOTING

Problem	Possible Cause	Suggested Solutions
“Add water“ indicator	There is no water	Fill the water tank with water,
light is on, a long beep		wait 3 minutes and press the
sounds		start button to restart.
“Ice Full“ indicator	The ice tank full	Empty ice basket completely
light is on, a beep	capacity is reached	or partially, wait 3 minutes and
sounds		press the start button to restart.
My Ice melts	The compressor has	Restart the compressor by
	stopped automatically.	pressing on start after the “Ice
		Full” or “Add Water” have
		been lit (see above).
		Nevertheless, operation will
		restart automatically once the
		temperature in the cavity will
		be above 40°F
Pilot lights do not turn	Blown fuse/ No power	Check the power socket /
on		Have the fuse replaced by a
		competent electrician. Please
		use fuse value AC 250V, 3.15A,
		∮5 x 20 only
The Ice made falls like	The water temperature	Stop the machine and reset
a single block, with a	in the water storage	the ice making cycle. Restart
lot of cubes sticking	box or ambient is too	the machine after turning it off.
together.	low
Conditions for ice	Refrigerant might be	Call 1-888-KALORIK for service
making cycles are right	leaking / sealed system	or email through
but no ice is made.	is	www.kalorik.com
	blocked
The lights of ice full and	Water tray is blocked	Unplug the appliance.
deficient come on in	by ice cube	Clean the evaporator.
the same time.		Plug the appliance back in
		and press the ”START” button.
		The appliance will restart
		automatically after 2 minutes.
The ice cube maker is	Water pipe is clogged	Please pull out the cap of the
jammed, or the water	by limescale or other	water pipe, then let the water
does not flow uniformly	particles	through the pipe in order to
in the evaporator		clean it and wash the clog
		away, then replace the cap.
		Resume operation.
	7	USK ICBM 30116/30155 - 090716