Motor protection filter
The motor protection filter must always be in place when operating the vacuum otherwise damage to the motor may occur.
To replace the motor protection filter - remove the dust container. The motor protection filter is located at the bottom of the inner chamber. Pull the filter upward to remove then simply replace with the new filter.
Exhaust filter
The exhaust filter should be cleaned every six months. Simply unclip the grill at the back of the vacuum cleaner and shake and tap the filter to remove any dust accumulated. Then relocate the filter and reattach the grill.
Care and Maintenance
Always switch the vacuum off, then switch off at the power outlet and unplug the appliance prior to cleaning or replacing either filter.
To clean the outside of the unit, wipe the exterior with a soft, damp cloth. Never use an abrasive cleaner.
IMPORTANT: Check and replace both the motor protection and HEPA filters approximately twice a year or when visibly clogged.
KBV580_IB_V3.indd 7 | 10/6/09 3:21:48 PM |
