Kambrook Safety
Read all instructions before operating and save for future reference
Using Your Kambrook Jaguar
TWISTER Vacuum Cleaner
When unpacking the vacuum cleaner check to see you have received all the required components, such as the hose and other accessories before discarding the packaging.
Ensure that the dust container and filters are correctly fitted.
Locate the crush proof hose (KBV50 only)/telescopic hose (KBV580 only) and push the connection on the front side of the unit, until a “click” sound is heard.
Connect the wide end of the metal wand to the hose end, and push together firmly.
Fit the floor tool to the narrow end of the wand and push together firmly.
Fully extend the power cord by pulling the power plug out from rear of the vacuum, until the yellow tape on the cord is showning.
IMPORTANT: ENSURE THAT YOU DO NOT OVER EXTEND THE POWER CORD - DO NOT EXTEND PAST THE RED WARNING TAPE ON THE CORD.
Plug into a 230/240V power point and switch the power on.
To commence vacuuming push down on the on/off button 
at the top of the vacuum.
When vacuuming is complete, push down on the ‘on/off’ button to switch off. Turn the power off at the outlet and then remove the power cord from the power outlet. When removing the plug from the power outlet, grasp the plug not the cord.
To retract the cord push down on the ‘cord rewind
button’ 
to retract the cord.
IMPORTANT: HOLD THE PLUG END WHEN RETRACTING THE CORD TO PREVENT IT FROM STRIKING YOU OR THE VACUUM.
IMPORTANT: ALWAYS ENSURE THAT THE DUST CONTAINER AND THE MOTOR PROTECTION FILTER ARE CORRECTLY FITTED. NEVER OPERATE WITHOUT THE DUST CONTAINER or FILTERS IN PLACE.
Variable Power Control
The power booster dial on the unit is to be used for variable power control. Turn the control clockwise for maximum power for vacuuming hard floor and carpet surfaces. Turn the control
Crevice and brush tool accessories
The crevice tool is ideal for vacuuming hard to reach places such as the edges along skirting boards.
The brush and upholstery tools can be used to vacuum delicate surfaces and areas such as shelves and venetian blinds.
Set the variable speed control between minimum and medium power when using the tool accessories.
Turn off the vacuum cleaner when changing any attachments.
KBV580_IB_V3.indd 5 | 10/6/09 3:21:47 PM |
